|Amplifier Modules - 600W Products
|600W AMPLIFIER MODULE (SDV1025-600)
A class D power amplifier module able to deliver up to 600Wrms into a 4 Ohm load.
This is the basic building block for a single channel amplifier. Additional components required to build a complete power amplifier include, pre-amplifier,
power supply, output filter and protection circuitry. For more complete products see below or contact Ecotec Systems for details.
|600W AMPLIFIER EVALUATION UNIT (SDV1042-600)
A class D amplifier module mounted onto a motherboard. The product includes a pre-amplifier, output filter
and protection circuitry. All that is need to make a single channel amplifier is a suitable power supply.
Simple power supply requirements are only a single positive voltage from +40Vdc (or ac) to 100Vdc (or ac) to give 600Wrms into 4 Ohms.
|600W AMPLIFIER EVALUATION UNIT (SDV1061-600)
A class D amplifier module mounted onto a motherboard. The product includes a pre-amplifier, output
filter and protection circuitry.
All that is need to make a single channel amplifier is a power supply. Includes a switching regulator to take a supply voltage and
regulate down to the 85Vdc required by the amplifier (Main supply from 120Vac or dc to 90Vac or dc. Auxiliary supplies at +/-15V dc required)
|600W PLATE AMPLIFIER (SDV1056-600)
A plate amplifier containing a SDV1061-300 evaluation board and a power supply. An "out of the box" solution for a single channel power amplifier.
|CUSTOM AMPLIFIER DESIGN
Our standard products can often be used to satsify customers' amplifier requirements.
EcoTec Systems Ltd, Bruntingthorpe Industrial Estate, Lutterworth, Leicestershire LE17 5QZ Tele +44 (0) 1162 479 794 Email:mailto:email@example.com
Click on a picture or text that becomes underlined when the cursor moves across it for more information